List of products by brand ALP DESIGN

The three weapons use different blades in cross-section, stiffness and scoring system: epee triangular (stiffest, 3-pin), foil rectangular (2-pin), sabre V-shaped with no electric point (2-pin, hit along the blade).

Size is the blade length. For foil and epee the figure differs between bare blade and electrified (point, wiring and socket add 2.5-3 cm). Sabre, having no electric point, has a single measure.

Foil and epee (bare → electrified):

• #0: 75 → 78 cm
• #2: 80 → 82.5 cm
• #3: 82.5 → 85 cm
• #4: 85 → 88 cm
• #5: 87.5 → 90 cm (adult competition length)

Sabre (single measure):

• #0: 75 cm · #2: 80 cm · #3: 82.5 cm · #4: 85 cm · #5: 88 cm

In Italy the most used sizes are: foil #0, #3, #4, #5; epee #0, #3, #5; sabre #3 and #5. Size is chosen by age, category and build, not by height alone. Blade, guard, point, socket and components must match the weapon used.

Standard blades are not tied to a specific brand and are interchangeable within compatibility limits. For maraging steel blades — stronger and longer-lasting, required at competition levels — 39SPORT stocks Blaize Frères (BF MRG).

An inspection is advisable when the point does not register correctly, the wire has come loose, the socket or point assembly has play, or the guard, grip or socket feels unstable. Intermittent operation may also indicate an electrical contact problem.

39SPORT performs a technical diagnosis of the fencing weapon before starting work, so the cause can be identified and only the necessary parts adjusted or replaced.

Blade stiffness affects feel, point control and weapon response. A more flexible blade may feel softer, while a stiffer blade reacts more quickly but requires greater technical control.

The choice depends on the weapon, experience, fencing style and personal preference. It is advisable to consult the coach before changing stiffness.

Yes. After the work is completed, 39SPORT carries out a final functional test of the weapon, checking electrical continuity, fastenings, the point and the components involved in the maintenance.

The aim is not simply to replace a spare part, but to return an epee, foil or sabre that has been checked for its intended use. The final result still depends on the overall condition of the weapon.

A blade should be replaced when it shows cracks, permanent deformation, abnormal bends, significant corrosion or damage around the point or tang.

A normal bend caused by use may be corrected carefully, but a damaged or weakened blade must not be used.

The decision depends on the condition of the blade, the number of worn components, the cost of spare parts and the overall reliability of the weapon. Repair is not always the best technical or economic option.

39SPORT assesses the weapon first and, when replacement of the weapon or a major component is more reasonable, explains this before proceeding. This avoids work that is disproportionate to the value and condition of the equipment.

After use, dry the blade, remove dirt and moisture, and store it away from wet clothing. Check the bend, point, screws, wire and tang area regularly.

Work on the electrical wire, point or assembly should be carried out with suitable tools and compatible components.

Yes. A pre-competition fencing weapon check can reduce the risk of faults on the piste. The inspection may include the point, weight, gauge checks, electrical continuity, guard socket, cables and component stability.

39SPORT carries out the inspection according to the weapon and the condition of the equipment. The applicable FIS and FIE requirements and the official event weapon-control procedures must still be checked.

No. Compatibility depends on the weapon, tang type, thread, electrical system, point, guard and grip.

Before assembly, check that all components are intended for the same weapon and comply with the manufacturer’s specifications.

Weapon length depends on the discipline, age, category and the coach’s technical instructions; it should not be chosen from the athlete’s height alone. 39SPORT lists weapons and blades in different lengths, including 78, 85 and 90 cm where available.

Before purchasing, check the size used by the club and the compatibility of blade, grip, guard, socket and electrical components.

Yes, when the blade and components are technically suitable. Wiring a fencing blade may include preparing the groove, fitting the wire, assembling the point and testing electrical continuity.

Before starting, 39SPORT checks compatibility between the blade, wire, point and weapon components. The work is carried out only when the condition of the equipment allows a reliable result.

An electric point must be specific to epee or foil and compatible with the relevant point barrel, blade wire and applicable rules.

Before purchasing, check the weapon, the system already fitted and the required spare part. Epee and foil points are not interchangeable.

An electric fencing point normally includes a tip, barrel, spring and screws; the system works together with the blade wire and weapon socket.

The components differ between epee and foil, so replacements must be compatible with the installed system.

The spring should be replaced when it no longer provides consistent operation or prevents the weapon from passing the required checks. Screws should be changed if bent, worn or unable to retain the tip correctly.

After any repair, the point must be adjusted and tested with suitable equipment.

A point may be faulty when a hit is not registered, the signal remains on or appears intermittently.

Possible causes include dirt, a sticking tip, an incorrectly adjusted spring, loose screws, a broken wire or faulty contacts. Testing should be carried out with a tester and scoring machine.

No. Point compatibility depends on the weapon, blade threading, point barrel and electrical system used.

Before fitting a replacement, check that it is intended for epee or foil and matches the existing components.

Choose a foil blade based on its size, material, flexibility, thread and weapon configuration. Check the size required for the fencer’s age and activity rather than relying only on height. Consider a standard or maraging blade according to the level of use and technical guidance. Before purchasing, check the technical specifications for compatibility with the point, grip, pommel and existing components.